HANG THE DOOR Place assembled door on secured track. Tighten the anti-jump ... If mounting into a concrete floor, use provided anchors. 5 6 7 1 3/16" 1/4" BARN DOOR HARDWARE KIT ASSEMBLY INSTRUCTIONS COMPLETED DOOR WITH BARN DOOR KIT **Note that these instructions depict the installation of Delaney Hardware 1000 Series Barn Door Kits. While hanger
3 Secure Track Use supplied anti-crush discs if installing to an internally ! braced wall. NEVER attach directly to drywall. Drill 19/64” [7.54mm] pilot holes in marked locations for track fasteners. Attach track to wall using track brackets and fasteners as shown. Use 5/16” Allen Wrench to install track screws Use supplied spacers as
Free shipping applies to Barn Door Hardware, Barn Doors, and Pocket Doors over $500. Front doors, interior doors, shower doors, any oversized door (wider than 3ft and taller than 7ft) and any special order doors have shipping costs which are calculated at checkout. Some barn door hardware track lengths do not qualify for free shipping.
BARN DOOR HARDWARE KIT - FRONT MOUNT INSTALLATION INSTRUCTIONS 090816 1 Recommended Door: • 1-3/8" or 1-3/4" thick • Up to 200 lbs Recommended Tools: ... the same instructions apply if your track has more. NOTE: If using double floor guide, or door is pre-mortissed for single hidden guide, this step
protrude from the door-face. Track protectors are eccentric and will be rotated to the correct position after the door is mounted on the track. 1. The floor guide is mounted to the floor at the bottom of the door, and prevents the door from swinging in or out. 2. For proper operation, a 1/4” wide slot should be present 1” deep into the bottom
Step B： Install Barn Door Track on Supporting Board. Drill “6mm” pilot holes for track mounting lag bolts into the board at marked locations; Attach track to mounting board with lag bolts with spacers and washers. Mounting the Barn Door Hangers. Once the track is installed, mount the hangers on the door itself.
To install the door stops, firstly move the barn door to an open position along the track leaving a 25mm overlap with the door opening. Step 18: Place the first door stop onto the track and against the roller and tighten the screws using the provided Allen key.
In conclusion, the process of installing a sliding barn door is a practical and stylish addition to any home. With the ability to mount a sliding rail track kit to any standard door slab and the simplicity of attaching handles and locks, homeowners can enjoy both the aesthetic and functional benefits without the need for extensive carpentry skills.
Follow these steps to mount the track for a single door: 1. To locate the position of the first mounting hole on the track: a. Mark where the closed position of the door will be and measure 1 1/8” in from this point. b. Mark the location of the first mounting hole. c. Calculate the distance from the floor to the track mounting holes. Mark the ...
BARN DOOR INSTALLATION INSTRUCTIONS 4 2m Track (x1) NON-CONCRETE WALL - MARK TRACK HOLES ON MOUNTING BOARD NOTE: Mounting board and screws not supplied. 7.1. Mark a centre line along the length of the mounting board. 7.2. On a flat surface, centre the track on the mounting board (ensure the track is straight on the board and an
3 Secure Track Use supplied anti-crush discs if installing to an internally ! braced wall. NEVER attach directly to drywall. Drill 19/64” [7.54mm] pilot holes in marked locations for track fasteners. Attach track to wall using track brackets and fasteners as shown. Use 5/16” Allen Wrench to install track screws Use supplied spacers as
BARN DOOR HARDWARE KIT - FRONT MOUNT INSTALLATION INSTRUCTIONS 062823 1 Recommended Door: • 1-3/8" or 1-3/4" thick • Up to 200 lbs Recommended Tools: ... the same instructions apply if your track has more. NOTE: If using double floor guide, or door is pre-mortissed for single hidden guide, this step
A header board provides the necessary support, especially if you can't mount the track directly into wall studs. How to Install a Header Board for a Barn Door. Select the Right Board: Choose a sturdy piece of wood, such as a 1x4 or 1x6, that matches the length of your track. ... Barn Door Track Installation Instructions. Draw a horizontal line ...
Step 3: Attaching the Hardware to the Barn Door. Mark the desired location to mount the trolley. Use a drill bit to drill the holes through the door. Mount the trolley onto the door using the provided hardware and an adjustable wrench. Repeat steps 1-3 for the other side of the door.
52" Barn Door Track Sliding Kit, Side Mounted Black Roller, Smoothly and Quietly, Easy Install, Heavy Duty, Up to 400 LBS, Bifold Door Hardware for 4 Doors (Door Not Included) ... along with detailed, step-by-step instructions. Transform your home with this remarkable barn door kit today! Customer reviews. 5 star 4 star 3 star 2 star 1 star 5 ...
